In case it isn’t obvious: SPENDING THIS MUCH OF TOP LINE REVENUE ON SALES AND MARKETING IS NEW . This is not business as usual. The higher gross margins generated by software and SaaS are enabling unprecedented spending on sales and marketing below the gross margin line. I read a study recently in which two economists tried to advance their preferred narrative by citing high gross margins that can exist in business today. Yes they are high in SaaS. No, that is not the whole story. Spending below the gross margin line on sales and marketing is far higher.
Many advanced users stack several compounds in order to get maximum results from their cycle. Normally when your stacking these types of supplements its best to use single compounds instead of premixed stacks. The problem with using a premixed stack is you may get more of one compound than you want. Most of these products have sweet spots. Lets use h-drol for an example according to many of the forums out there 75mg is the sweet spot for this compound. Now lets say you have a halodrol product that is mixed with 10mg of Methylstenbolone. In order to get the proper amound of hdrol you will get more than the recommended dose of M-sten.
In electrodynamic suspension (EDS), both the guideway and the train exert a magnetic field, and the train is levitated by the repulsive and attractive force between these magnetic fields.  In some configurations, the train can be levitated only by repulsive force. In the early stages of maglev development at the Miyazaki test track, a purely repulsive system was used instead of the later repulsive and attractive EDS system.  The magnetic field is produced either by superconducting magnets (as in JR–Maglev) or by an array of permanent magnets (as in Inductrack ). The repulsive and attractive force in the track is created by an induced magnetic field in wires or other conducting strips in the track. A major advantage of EDS maglev systems is that they are dynamically stable – changes in distance between the track and the magnets creates strong forces to return the system to its original position.  In addition, the attractive force varies in the opposite manner, providing the same adjustment effects. No active feedback control is needed.